Continual annealed (CA) | Thickness (CA) | Width | Exception | Batch annealed (BA) | Thickness (BA) | Width | Exception |
---|---|---|---|---|---|---|---|
(mm) | (mm) | thick. - width | (mm) | (mm) | thick. - width | ||
TH370, TH415, TH435 |
0,180 - 0,400 | 720 - 1000 | 0,170 - max 850 | TS245, TS260, TS275, TS290 | 0,180 - 0,400 | 720 - 995 | 0,170 - max 820 |
TH460N |
0,180 - 0,400 | 720 - 995 | 0,170 - max 830 |
N - nitrogenous chemistry
Continual annealed (CA) | Thickness (CA) | Width | Exception | Batch annealed (BA) | Thickness (BA) | Width | Exception |
---|---|---|---|---|---|---|---|
(mm) | (mm) | thick. - width | (mm) | (mm) | thick. - width | ||
TH520 |
0,160 - 0,290 | 720 - 985 | 0,150-0,155 - max 915 | TS480, TS520 | 0,140 - 0,280 | 720 - 970 | |
TH550 |
0,155 - 0,290 | 720 - 985 | 0,150 - max 965 | TS550 | 0,140 - 0,260 | 720 - 985 | 0,130-0,135 - max 920 |
TH580 |
0,150 - 0,290 | 720 - 970 | TS550N | 0,130 - 0,260 | 720 - 920 | ||
TH620 |
0,140 - 0,290 | 720 - 970 | 0,130 - 0,260 | 720 - 920 | |||
TH550M, TH580M, TH620M1) |
0,140 - 0,210 | 720 - 985 | |||||
TH550N |
0,170 - 0,290 | 720 - 985 | |||||
TH550D, TH580D, TH620D1) |
0,140 - 0,250 | 720 - 985 | |||||
TH580N |
0,165 - 0,290 | 720 - 985 | |||||
TH620N |
0,155 - 0,290 | 720 - 985 |
Reduction | Annealing | Nominal | Width | Coil diameter (mm) | Weight (t) | Length of sheets (mm) | ||
---|---|---|---|---|---|---|---|---|
thickness (mm) | respect to previous table | inside | max. outside | coil | stack | |||
SR |
CA | 0,17 | 720 - 850 | 420 or (500)2) | 1700 1800 |
3,0 - 11,80 | 0,5 - 2,7 | 500 - 1165 |
0,18 - 0,40 | 720 - 960 (1005)2) | |||||||
BA | 0,17 | 720 - 820 | ||||||
0,18 - 0,40 | 720 - 960 (995)2) | |||||||
DR |
BA and CA | 0,14 - 0,17 | 720 - 960 (965)2) | |||||
0,175 - 0,29 | 720 - 960 (985)2) |
Tin layer5) |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Equal E |
E 1,0/1,0 | E 1,4/1,4 | E 1,8/1,8 | E 2,0/2,0 | E 2,8/2,8 | E 4,0/4,0 | E 5,0/5,0 | E 5,6/5,6 | E 7,5/7,54) | E 8,4/8,44)* |
Differential3)5) D |
D 1,0/2,0 | D 5,0/2,8 | D 4,0/2,8 | D 1,4/2,8 | D 4,0/2,0 | D 5,6/2,8 | D 5,6/4,0 | D 8,4/2,84)* | D 8,4/5,64) | D 2,8/11,24) |
* available as K-plate (with increased layer of FeSn2)
Standard | Deviation |
---|---|
EN 10 205/91 | ± 8,5 % |
EN 10 202/01 | ± 5 % |
Type | Roughness Ra [μm] SR | Roughness Ra [μm] DR |
---|---|---|
Fine Stone | 0,25 - 0,45 | 0,25 - 0,45 |
Stone | 0,35 - 0,60 | 0,35 - 0,60 |
Treatment technique | Designation of
surface treatment material |
Weight of treatment [mg.m-2 / side] |
---|---|---|
passivation |
311 (CDC Cathodic Sodium Dichromate) |
3,5 - 9,0 |
300 (SDCD Sodium Dichromate dip treatment) |
1,0 - 3,0 | |
505/555 (Chromium Free Passivation Alternative, Ti/Zr based)6) | 0,8 - 1,2 | |
oiled |
DOS (Dioctyl Sebacate) |
2,00 - 15,0 |
1) on request in special minimum earing quality M - medium, D
- deep drawing
2) subject to prior agreement
Other dimensions are subject to prior agreement
3) marked bottom side of the strip
4) only for coils and sheets with width up to 970mm
5) other layers or combination are subject to prior agreement
6) technical application only (excluding food)
T I N M I L L
CONTACT
CONTACT US
Igor Danko
Director Sales Tin
+421 556 734 187
+421 903 614 393
idankosk.uss.com