Search:

Prázdny
Prázdny

DRAWING STEELS

Prázdny

In category Hot Dip Galvanized

Prázdny

 

 

CHARAcTERISTIcs

Hot dip galvanized sheets made of drawing grades are suitable for cold forming and deep-drawing. The sheets are used for the production of automobile parts appliences, in building industry and for production of profiles, corrugated sheets, roof coverings and engineering.

U. S. Steel Košice has implemented and maintains a quality control
system in accordance with the standard EN ISO 9001 and IATF 16949 for automotive industry, issued by TÜV SÜD.

Grades

Galvanized products are classified into quality grades according to their chemical composition and mechanical properties.

TECHNICAL SPECIFICATION

DRAWING GRADES - BRAND CORRESPONDENCE

European standard
EN 10346/09
Japan
JIS G3302
USA
EN 10346/09 ASTM
U. S. Steel Košice
TN USSK 10346-4/13
ZINKOMAGTM
- SGC C
SGC D1
A 526, A 527, A 528
A 653 CS Type A,B,C
-
DX51D + Z + ZF DX51D + ZM
DX52D + Z + ZF SGC D2 A 528, A 653 CS Type A,B,C DX52D + ZM
DX53D + Z + ZF SGC D3 A 653 DDS -
DX54D + Z + ZF - A 653 EDDS -
DX56D + Z + ZF - - -

DX57D + Z

- - -

CHEMICAL COMPOSITION

Grades according to
EN 10346/09
U. S. Steel Košice
Heat analysis in %
CMAX MnMAX PMAX SMAX SiMAX TiMAX
DX51D + Z, ZF 0,18 1,20 0,12 0,045 0,50  0,30
DX51D + ZM 0,18 1,20 0,12 0,045 0,50  0,30
DX52D + Z, ZF 0,12 0,60 0,10 0,045 0,50  0,30
DX52D + ZM 0,12 0,60 0,10 0,045 0,50  0,30
DX53D + Z, ZF 0,12 0,60 0,10 0,045 0,50  0,30
DX54D + Z, ZF 0,12 0,60 0,10 0,045 0,50  0,30
DX56D + Z, ZF 0,12 0,60 0,10 0,045 0,50  0,30
DX57D + Z 0,12 0,60 0,10 0,045 0,50  0,30

MECHANICAL PROPERTIES

Grades according to
EN 10346/09
U. S. Steel Košice
Rp0,2
[MPa]
Rm
[MPa]
A MIN (%)
Lo = 80 mm
r90
min.
n90
min.
DX51D + Z + ZF - 270 - 500 22 - -
DX51D + ZM - 270 - 500 22 - -
DX52D + Z + ZF 140 - 300 270 - 420 26 - -
DX52D + ZM 140 - 300 270 - 420 26 - -
DX53D + Z + ZF 140 - 260 270 - 380 30 - -
DX54D + Z + ZF 120 - 220 260 - 350 36; (34)1) 1,60; (1,40)1) 0,18
DX56D + Z + ZF 120 - 180 260 - 350 39; (37)1) 1,90; (1,70)1) 0,21; (0,20)1)
DX57D + Z 120 - 170 260 - 350 41 2,1 0,22

1) suitable for +ZF

DIMENSIONS OF SHEETS AND COILS [ MM ]

for DX51D - DX57D

Nominal thickness Width
  800 1000 1260 1330 1460 1500
0,40 - 0,49              
0,50 - 0,59            
0,60 - 0,79          
0,80 - 0,89        
0,90 - 2,00      
Nominal thickness Sheet length Coil diameter Slit coil width Nominal coil weight
[kg.mm -1 of width]
inner outer
0,50 - 2,00 1 000 - 3 100 approx. 500 max. 1 400 40 - 600
(depending on sheet thickness)
3 - 9,9
approx.600 2 - 9,4

NOTE: - thickness is graded by 0,01 mm, width is graded by 5,0 mm, length is graded by 5 mm
- nominal thickness includes zinc coat

THICKNESS TOLERANCES - EN 10143/06 [ MM ]

RE < 260 MPA

Nominal thickness Normal tolerances at width Reduced tolerances at width
≤ 1 200 >1 200 ≤ 1 500 ≤ 1 200 >1 200 ≤ 1 500
≤ 0,40 ± 0,04 ± 0,05 ± 0,030 ± 0,035
> 0,40 ≤ 0,60 ± 0,04 ± 0,05 ± 0,035 ± 0,040
> 0,60 ≤ 0,80 ± 0,05 ± 0,06 ± 0,040 ± 0,045
> 0,80 ≤ 1,00 ± 0,06 ± 0,07 ± 0,045 ± 0,050
> 1,00 ≤ 1,20 ± 0,07 ± 0,08 ± 0,050 ± 0,060
> 1,20 ≤ 1,60 ± 0,10 ± 0,11 ± 0,060 ± 0,070
> 1,60 ≤ 2,00 ± 0,12 ± 0,13 ± 0,070 ± 0,080

NOTE: reduced tolerances are the subject to prior agreement

THICKNESS TOLERANCES - EN 10143/06 [ MM ]

260 < RE ≤ 360 MPA and grade DX51D

Nominal thickness Normal tolerances at width Reduced tolerances at width
≤ 1 200 >1 200 ≤ 1 500 ≤ 1 200 >1 200 ≤ 1 500
≤ 0,40 ± 0,05 ± 0,06 ± 0,035 ± 0,040
> 0,40 ≤ 0,60 ± 0,05 ± 0,06 ± 0,040 ± 0,045
> 0,60 ≤ 0,80 ± 0,06 ± 0,07 ± 0,045 ± 0,050
> 0,80 ≤ 1,00 ± 0,07 ± 0,08 ± 0,050 ± 0,060
> 1,00 ≤ 1,20 ± 0,08 ± 0,09 ± 0,060 ± 0,070
> 1,20 ≤ 1,60 ± 0,11 ± 0,13 ± 0,070 ± 0,080
> 1,60 ≤ 2,00 ± 0,14 ± 0,15 ± 0,080 ± 0,090

NOTE: reduced tolerances are the subject to prior agreement

SHEET FLATNESS TOLERANCES1) IN ACCORDANCE WITH EN 10143/06 [ MM ]

RE < 260 MPA

Nominal width Normal tolerances at thickness Reduced tolerances2) at thickness
< 0,70  ≥ 0,70 < 2,00 < 0,70  ≥ 0,70 < 1,60  ≥ 1,60 < 2,00
 ≥ 600 < 1 200 10 8 5 4 3
 ≥ 1 200 < 1 500 12 10 6 5 4
 ≥ 1 500 17 15 8 7 6

1) coil flatness tolerances are subject to prior agreement
2) reduced tolerances are subject to prior agreement

ODCHÝLKY ROVINNOSTI TABÚĽ1) PODĽA EN 10143/06 [ MM ]

260 < RE ≤ 360 MPA and grade DX51D

Nominal width Normal tolerances at thickness Reduced tolerances2) at thickness
< 0,70  ≥ 0,70 < 2,00 < 0,70  ≥ 0,70 < 1,60  ≥ 1,60 < 2,00
 ≥ 600 < 1 200 13 10 8 6 5
 ≥ 1 200 < 1 500 15 13 9 8 6
 ≥ 1 500 20 19 12 10 9

1) coil flatness tolerances are subject to prior agreement
2) reduced tolerances are subject to prior agreement

PARAMETERS OF COATING

Zinc coating
(Z)
Min. weight of surface coating from
both sides [g.m-2]
same 100; 140; 150; 180; 200; 225; 275;(350)
differential 140/100; 150/85;

 

Zinc-iron coating
(ZF)
Min. weight of surface coating from
both sides [g.m-2]
same 90; 100; 110; 120
Zn-Al-Mg coating
(ZM)
Min. weight of surface coating from
both sides [g.m-2]
same 100 - 150

Other dimensions are subject to prior agreement
Informative thickness of zinc layer: 7g.m-2 ≈ 1μm

OTHER FEATURES

COATING PROPERTIES

Zinc coated products (Z)

  • normal zinc spangle (N)
  • minimized spangle (M)

Zinc-iron alloy coated products (ZF)
Zinc-aluminum-magnesium coating (ZM)

SURFACE QUALITY

  • coated surface A according to EN 10 346/09
  • improved surface B according to EN 10 346/09
  • surface material C according to EN 10 346/09

SURFACE TREATMENT

  • chemically passivated C (Cr 6+ free; f- - free, RoHS compliant
  • oiled O (0,6-2,5 g.m-2 )
  • chemically passivated and oiled CO (only coils)
  • TOC (Thin Organic Coating) S
  • without surface treatment

If you need specific parameters that are not listed here, please contact us

Logistics information

We offer flexible product delivery with multiple options for packaging and methods of transportation.

More     

D R A W I N G   S T E E L S

CONTACT

CONTACT US PERSONALLY

Milan Beličák

Director Sales Czech Republic and Slovakia

    +421 556 734 598

    +421 903 601 790

    mbelicaksk.uss.com

Milan Malík

Director Sales Poland

  +421 556 734 654

  +421 903 627 471

  mmaliksk.uss.com

Eva Širilová

Director Sales West Europe

  +421 556 734 016

  +421 917 656 761

  esirillovask.uss.com

Ján Rohár

Director Sales South & East Europe and Export

  +421 556 734 596

  +421 903 616 433

  jroharsk.uss.com

Dušan Dzurovčin

Director Sales Austria

  +421 556 734 538

  +421 917 731 813

  ddzurovcinsk.uss.com

How can we help your business grow ?

If you are interested in cooperation, do not hesitate to write us a message. We will contact you immediately with a specific offer.

Privacy policy settings

We use cookies so that we can provide you with the best user experience possible. More info...