EN 10025-2/04 | Japan | USA | ||
---|---|---|---|---|
JIS G 3101 | JIS G 3106 | ASTM | SAE | |
S185 | SS 330 | - | - | - |
S235JR 1) | - | - | A570, Gr. 30,33,36 A 569 A 283, Gr. C, D |
1009 1010 |
S235J0 1) | - | - | - | - |
S235J2 1) | - | - | - | - |
S275JR 1) | SS 400 | SM 400 A SM 400 B SM 400 C |
A 570, Gr. 40, 45 A 36 |
1012 1015 - 1022 |
S275J0 1) | - | - | A 529 | - |
S275J2 1) | - | - | - | - |
1) also applies to grades in state + N, +AR and +M
Grades according to EN 10025-2/04 |
Heat analysis in % | |||||||
---|---|---|---|---|---|---|---|---|
CMAX | MnMAX | PMAX | SMAX | SiMAX | AlMIN | NMAX | CuMAX | |
S185 | - | - | - | - | - | - | - | - |
S235JR | 0,17 | 1,40 | 0,035 | 0,035 | - | - | 0,012 | 0,55 |
S235J0 | 0,17 | 1,40 | 0,030 | 0,030 | - | - | 0,012 | 0,55 |
S235J2 | 0,17 | 1,40 | 0,025 | 0,025 | - | - | - | 0,55 |
S275JR | 0,21 | 1,50 | 0,035 | 0,035 | - | - | 0,012 | 0,55 |
S275J0 | 0,18 | 1,50 | 0,030 | 0,030 | - | - | 0,012 | 0,55 |
S275J2 | 0,18 | 1,50 | 0,025 | 0,025 | - | - | - | 0,55 |
Grades according to EN 10025-5/04 |
ReH MIN [MPa] |
Rm[MPa] | AMIN(%) | KVMIN2)[J] | ||||
---|---|---|---|---|---|---|---|---|
a < 3 | a ≥ 3 | L0=80 mm | L0=5,65√S0 | |||||
1,5 < a ≤ 2 | 2 < a ≤ 2,5 | 2,5 < a < 3 | a ≥ 3 | |||||
S185 | 185 | 310-540 | 290-510 | l 12 t 10 |
l 13 t 11 |
l 14 t 12 |
l 18 t 16 |
- |
S235JR | 235 | 360-510 | 360-510 | l 19 t 17 |
l 20 t 18 |
l 21 t 19 |
l 26 t 24 |
+20˚C 27 |
S235J0 | 0˚C 27 | |||||||
S235J2 | -20˚C 27 | |||||||
S275JR | 275 | 430-580 | 410-560 | l 17 t 15 |
l 18 t 16 |
l 19 t 17 |
l 23 t 21 |
+20˚C 27 |
S275J0 | 0˚C 27 | |||||||
S275J2 | -20˚C 27 |
grades: S185 - S275
Thickness [mm] 1) 2) 3) |
Sheet width [mm] 1) |
Weight [kg.m2] | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
from | to | 750 | 900 | 1000 | 1100 | 1250 | 1400 | 1500 | teardrop | diamond | |
3,00 6) | 3,99 | Length of sheets: 2 000 - 4 000 mm 4) | 27,5 | 27,6 | |||||||
4,00 | 4,99 | 33,5 | 35,4 | ||||||||
5,00 | 5,99 | Inner coil diameter: 850 (+50; -20) mm | 41,5 | 43,3 | |||||||
6,00 | 6,99 | Inner pickled coil diameter: 600, 850 | 49,2 | 51,1 | |||||||
7,00 | 7,99 | Outercoil diameter: 1850 mm | 57,1 | 59,0 | |||||||
8,00 | 8,99 | Coil weight: 5,0 - 15,1 kg.mm-1 of width | 64,9 | 66,8 | |||||||
9,00 | 9,99 | 72,8 | 74,7 | ||||||||
10,00 | Lenght of sheets: 2 000 - 6 000 5) | 80,6 | 82,5 |
1) Thickness graded by 0,05 mm, width by 5,00 mm,
length by 50 mm
2) Nominal sheet thicknesses are listed without patterns
3) Deepening of patterns is allowed; shape and height not
guaranteed
4) On agreement sheets are delivered up to length of 6 000 mm;
lengthsabove 4 000 mm without guarantee of flatness, length graded by 50
mm
5) On agreement sheets are delivered up to length
of 12 000 mm; lengths above 6 000 mm without guarantee of flatness, length
graded by 50 mm
6) Thickness 3.00 - 3.49 mm without guarantee of flatness
Other dimensions are subject to prior agreement
Nominal thickness | DIN 59 220 | U. S. Steel Košice |
---|---|---|
3,00 - 4,00 | + 0,80; - 0,40 | ± 0,50 |
5,00 - 6,00 | + 1,10; - 0,40 | ± 0,60 |
7,00 - 10,00 | + 1,20; - 0,50 | ± 0,70 |